Forum Menu

RPI4 - Debian / LinuxCNC / EtherCAT / XFCE

More
4 years 5 months ago - 4 years 5 months ago #243637 by ftree
Replied by ftree on topic RPI4 - Debian / LinuxCNC / EtherCAT / XFCE

The wheel is in
build/dist
on my pi it is called
Code:
vtk-9.1.20220518.dev0-cp310-cp310-linux_aarch64.whl So tonight I'll be onto installing qtpyvcp  


 
Code:
Can you share that whl ?  I'm struggling to get vtk compiled.
Last edit: 4 years 5 months ago by ftree.

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #243639 by rodw
Replied by rodw on topic RPI4 - Debian / LinuxCNC / EtherCAT / XFCE
Contact me via my web site  here
www.vmn.com.au/contact
or use the chat
and I'll share my stuff in Google Drive. 

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #243666 by rodw
Replied by rodw on topic RPI4 - Debian / LinuxCNC / EtherCAT / XFCE
hmm, unmet build dependencies right near the end

qtdeclarative5-dev tcl-dev tk-dev

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago - 4 years 5 months ago #244380 by ajsinfotech
Replied by ajsinfotech on topic RPI4 - Debian / LinuxCNC / EtherCAT / XFCE
Hi elovalvo

Who/where was this installed? 
Code:
cd /usr/lib/python3/dist-packages/qtvcp/designer


I mean the qtvcp thing.
Thanks
Last edit: 4 years 5 months ago by ajsinfotech.

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #244390 by elovalvo
Replied by elovalvo on topic RPI4 - Debian / LinuxCNC / EtherCAT / XFCE
Qtvcp is installed with Linuxcnc

The LinuxCNC installation procedure creates automatically the structure and related files

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #244396 by ajsinfotech
Replied by ajsinfotech on topic RPI4 - Debian / LinuxCNC / EtherCAT / XFCE
Ok.
So much compilations and installations got me a little confused, sorry.

Many thanks elovalvo!

 

Please Log in or Create an account to join the conversation.

Time to create page: 0.261 seconds
Powered by Kunena Forum