Gmoccapy - A new screen for linuxcnc

Norbert
This was a new one for me. Maybe I was just lucky to get away with it before.

Thanks, it is all ok now.

@Marius,

no problem, still waiting for the panel )

@Verser.
you are to slow answering my questions, so I pushed allready the requestet changes

gmoccapy_1_0_6 - made more options for EMBEDDED_TABS

gmoccapy ver. 1.0.6
- introduced new locations for EMBEDDED_TABS, it is possible
to use in addition to the previous ones now also:

* box_cooling (will hide the cooling frame and introduce your glade file)
* box_spindle (will hide the spindle frame and introduce your glade file)
* box_vel_info (will hide the velocity frames and introduce your glade file)
* box_custom_1 (will introduce your glade file left of vel_frame)
* box_custom_2 (will introduce your glade file left of cooling_frame)
* box_custom_3 (will introduce your glade file left of spindle_frame)
* box_custom_4 (will introduce your glade file right of spindle_frame)

Is that what you wanted?

WIKI is up to date! But one of you should add some screenshots there;-)
And be aware, Spring is coming and I can listen all my bikes crying " lets go out now!!! "

So in summer the steps will be quite slower.

Norbert

it's a pity,.. panel Compensation Z is small
I would like to place it in a box_coolant_and_spindle position WITH box_coolant_and_spindle.
A box_right(box_left) panel is too big and there will be many voids

O! good news!
I am happy, thank you very much, Norbert!

I would like to place it in a box_coolant_and_spindle position WITH box_coolant_and_spindle.
A box_right(box_left) panel is too big and there will be many voids

OK that is then box_custom_3!

By the way, is your name really verser?

Norbert

No, verser is nickname.
I promote your interface in Russian forum
cnc-club.ru/forum/viewtopic.php?f=15&t=4575&p=110957#p110957