Another plasma component...

  • thefabricator03
  • Visitor
  • Visitor
7 years 2 months ago - 7 years 2 months ago #141572 by thefabricator03
Replied by thefabricator03 on topic Another plasma component...
When I do a git pull it says its up to date.

That would rule out not using the latest version?

Also I am using Rod post processor he posted and I have set the Sheetcam code snippets as per his recommendations.
Last edit: 7 years 2 months ago by thefabricator03.

Please Log in or Create an account to join the conversation.

More
7 years 2 months ago #141573 by phillc54
Replied by phillc54 on topic Another plasma component...
OK, I can replicate that here so it is another cockup by me.

Edit your ngc file so there are no comments after a M190 and you should be able to get back to work.

I will take a look now and fix it.

Sorry... :(

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Visitor
  • Visitor
7 years 2 months ago #141575 by thefabricator03
Replied by thefabricator03 on topic Another plasma component...
Lol new problem,

Edited the G-code and get this error,



Dont worry we will get there eventually :)

Please Log in or Create an account to join the conversation.

More
7 years 2 months ago #141576 by phillc54
Replied by phillc54 on topic Another plasma component...
Try this:

Edit plasmac_gcode.py so it looks like:
Code:
200 if 'm190' in line: 201 if '(' in line: 202 line = line.split('(', 1)[0] 203 elif ';' in line: 204 line = line.split(';', 1)[0] 204 first, last = line.split('p', 1)

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Visitor
  • Visitor
7 years 2 months ago #141577 by thefabricator03
Replied by thefabricator03 on topic Another plasma component...
Ok did that now this one,

Please Log in or Create an account to join the conversation.

More
7 years 2 months ago #141578 by phillc54
Replied by phillc54 on topic Another plasma component...
can you post the ngc file

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.374 seconds
Powered by Kunena Forum