Another plasma component...

More
7 years 1 month ago #145301 by phillc54
Replied by phillc54 on topic Another plasma component...
The one on the right is for overide, it also ties in with the digital pin for tuening THC off in GCode

Please Log in or Create an account to join the conversation.

More
7 years 1 month ago #146453 by phillc54
Replied by phillc54 on topic Another plasma component...
Well, the machine is finally running and after a few quick calibration cuts I cut the PlasmaC wrench and it actually fits my ER25 collet.



Now for some tidying up and fine tuning.

Happy as... :)
Attachments:
The following user(s) said Thank You: tommylight, Clive S, rodw, islander261

Please Log in or Create an account to join the conversation.

More
7 years 1 month ago #146471 by tommylight
Replied by tommylight on topic Another plasma component...
Oh the joy !
:)
The following user(s) said Thank You: phillc54

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Visitor
  • Visitor
7 years 1 month ago #146482 by thefabricator03
Replied by thefabricator03 on topic Another plasma component...
Pics of machine?

Please Log in or Create an account to join the conversation.

More
7 years 1 month ago #146490 by islander261
Replied by islander261 on topic Another plasma component...
Phill

Good work!

Thank you for all the work you put in on developing the Plasmac Branch now part of Master. You have profoundly changed the LinuxCNC plasma world. If the rest of world knew about PlasmaC there would be no demand for any Mach based plasma controls or LCNC adaptions of Mach controls.

John
The following user(s) said Thank You: phillc54, Clive S, rodw, thefabricator03

Please Log in or Create an account to join the conversation.

More
7 years 1 month ago #146511 by phillc54
Replied by phillc54 on topic Another plasma component...
John,

Thank you for the kind words and also for all your help ironing out the early bugs. It is and has been an enjoyable experience.

Cheers, Phill.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.606 seconds
Powered by Kunena Forum