Hypersensing questions

I am goi8ng to test it with the float switch as the probe then try the ohmic3 sensor version.

bevins wrote:
I ordered the DR-15-24 same except not thin line. Still class II isolation and power supply.

Interesting. Aside from availability, I wanted to know what you got for the extra $. I had a look at the specs. the DR-15-24 has less output derating once the ambient temp goes above 50 deg C. That was about all I cold see.


Plasmac supports both ohmic sensing and float switch input at the same time so I would do both right at the beginning.

rodw wrote:

bevins wrote:
I ordered the DR-15-24 same except not thin line. Still class II isolation and power supply.

Interesting. Aside from availability, I wanted to know what you got for the extra $. I had a look at the specs. the DR-15-24 has less output derating once the ambient temp goes above 50 deg C. That was about all I cold see.


Plasmac supports both ohmic sensing and float switch input at the same time so I would do both right at the beginning.

Well, at first I couldn't find the HDR, so I got the DR. ButI ordered the HDR after and got it today so. I don't know.... I got my 5 watt resistors today also.

Also got this baby connected and ready to go......
Not sure what I should turn on or test first....lol

Finally! The moment we've all been waiting for is getting closer! Its been a long time coming!

AH, have to wire the ohmic power supply and resitors and THCAD