Hypersensing questions

bevins wrote: Not sure what I should turn on or test first....lol

Do the included wrench, i am still the only one who did not cut that ... yet !

tommylight wrote:

bevins wrote: Not sure what I should turn on or test first....lol

Do the included wrench, i am still the only one who did not cut that ... yet !

Don't you use ER32 collets Tom?

phillc54 wrote:

tommylight wrote:

bevins wrote: Not sure what I should turn on or test first....lol

Do the included wrench, i am still the only one who did not cut that ... yet !

Don't you use ER32 collets Tom?

Nope, again "yet", but i do have 2 of ER20 collet spindles collecting dust somewhere in the shop, got the used or most probably fried as i did test one with a VFD and the poor VFD kept complaining about over current.
Of more urgency would be to do some 9mm ones for changing the electrodes on the torches.

tommylight wrote:

bevins wrote: Not sure what I should turn on or test first....lol

Do the included wrench, i am still the only one who did not cut that ... yet !

Neither have I. I think Phill bought his Collet chuck after I adopted Plasmac in the early days....
And I already had a safety spanner for my ER32....

rodw wrote: And I already had a safety spanner for my ER32....

It amuses me that on lathes.co.uk he describes any lathe tailstock without a lever as "operated by a self hiding spanner"

ok, have to compile the ohmic3 comp now.

Everything is plugged and powered up.

What wrench are you talking about?