homing with Phase Z encoder on MESA 7i96s

OK, thanks for the explanation, so I've set all this up correctly on my other axes with switches
I've performed the action, search velocity to 0 on my b axis with encoder. but the axis doesn't stop. it doesn't seem to find the index? still the same problem.

Can you:

1. Post your current hal and ini files

2. When homing B use halshow to watch joint.3.index-enable
and report it's behavior

joint.3.index-enable should get set true (yellow) when B homing starts
and get cleared at the index

Topic separated, finally.
@JackRay,
Please refrain from tainting existing topics with unrelated content, start a new topic next time.
Thank you.

I don't understand, I have to create another subject.

I've just created this topic:
"homing with Phase Z encoder on MESA 7i96s".

tommylight wrote:

Topic separated, finally.

... start a new topic next time.

It was for next time, not for this one, this one is fixed already.
Continue here.
Thank you.