StepConf Wizard 592 topics

Stepper Configuration Wizard for Parallel Port

Forum Header

Subject	Replies / Views	Last Post
stepconf is off 50% Topic started 31 Mar 2015 08:12, by alexlinuxcnc Last Post 11 Apr 2015 01:00 by alexlinuxcnc	Replies:7 Views:1813	alexlinuxcnc Last Post by alexlinuxcnc 11 Apr 2015 01:00
Need help with spindle setup Topic started 31 Mar 2015 21:38, by muamerb Last Post 02 Apr 2015 01:45 by muamerb	Replies:8 Views:1930	muamerb Last Post by muamerb 02 Apr 2015 01:45
Bug with stepconf and spindle control tab? Topic started 29 Mar 2015 19:48, by MrFluffy Last Post 30 Mar 2015 23:07 by MrFluffy	Replies:4 Views:1817	MrFluffy Last Post by MrFluffy 30 Mar 2015 23:07
Axis direction problems (possibly due to upgrade?) Topic started 20 Nov 2010 21:48, by stewarma Last Post 26 Mar 2015 00:41 by eFalegname	Replies:4 Views:3923	Last Post by eFalegname 26 Mar 2015 00:41
Motors OK in Stepconf -no response in LinuxCNC Topic started 22 Mar 2015 07:54, by TwoFeetDown Last Post 22 Mar 2015 09:29 by TwoFeetDown	Replies:2 Views:1535	Last Post by TwoFeetDown 22 Mar 2015 09:29
Longs-Motor - Nema 23, 34, 42, Step Time/space/dir Topic started 26 Sep 2013 10:05, by fannlow Last Post 13 Mar 2015 02:50 by johnl2	Replies:8 Views:17.5k	johnl2 Last Post by johnl2 13 Mar 2015 02:50
step/rev problem Topic started 12 Mar 2015 09:45, by johnl2 Last Post 13 Mar 2015 01:17 by johnl2 1 2	Replies:10 Views:4214	johnl2 Last Post by johnl2 13 Mar 2015 01:17
Period time. Topic started 04 Mar 2015 03:03, by ww34ww34 Last Post 11 Mar 2015 07:01 by ww34ww34	Replies:4 Views:1614	ww34ww34 Last Post by ww34ww34 11 Mar 2015 07:01
Help Configuring Leadshine MX4660 Topic started 03 Mar 2015 11:52, by bwthor Last Post 04 Mar 2015 01:42 by bwthor	Replies:4 Views:4013	bwthor Last Post by bwthor 04 Mar 2015 01:42
3020T Configuration - Please Delete Topic started 25 Feb 2015 09:06, by brosskgm Last Post 25 Feb 2015 09:06 by brosskgm	Replies:0 Views:1716	brosskgm Last Post by brosskgm 25 Feb 2015 09:06
Jog ok in stepconfig, non continous in Axis 2.6.5 Topic started 14 Feb 2015 03:30, by hurco Last Post 14 Feb 2015 23:25 by hurco	Replies:5 Views:1797	hurco Last Post by hurco 14 Feb 2015 23:25
Stepconf question from a newbie! Topic started 11 Jan 2015 14:36, by John Hill Last Post 16 Jan 2015 11:52 by John Hill 1 2	Replies:11 Views:5224	John Hill Last Post by John Hill 16 Jan 2015 11:52
Corner errors Topic started 30 Dec 2014 23:09, by jjharley Last Post 01 Jan 2015 02:05 by jjharley	Replies:2 Views:1563	jjharley Last Post by jjharley 01 Jan 2015 02:05
Latency jumps to 400000 Topic started 29 Dec 2014 22:55, by yeahiiii Last Post 31 Dec 2014 21:10 by ArcEye	Replies:3 Views:1815	ArcEye Last Post by ArcEye 31 Dec 2014 21:10
limit and home switch Topic started 02 Dec 2014 21:19, by gaeldk Last Post 04 Dec 2014 22:58 by gaeldk 1 2	Replies:10 Views:8347	gaeldk Last Post by gaeldk 04 Dec 2014 22:58
Question about stepgen type 1 Topic started 26 Nov 2014 18:22, by color Last Post 27 Nov 2014 01:55 by color	Replies:3 Views:2127	color Last Post by color 27 Nov 2014 01:55
Parallel port settings Topic started 04 Nov 2014 17:38, by AMelvin Last Post 06 Nov 2014 01:25 by ArcEye	Replies:5 Views:2036	ArcEye Last Post by ArcEye 06 Nov 2014 01:25
Where are the results of the latency test stored? Topic started 04 Nov 2014 03:59, by Delron Last Post 04 Nov 2014 20:58 by andypugh	Replies:4 Views:2109	Last Post by andypugh 04 Nov 2014 20:58
Using PDM mode for Spindle Control Topic started 31 Oct 2014 22:44, by sgsracing Last Post 01 Nov 2014 01:34 by sgsracing	Replies:4 Views:5943	sgsracing Last Post by sgsracing 01 Nov 2014 01:34
Sound Logic Combo Board Pinout Question Topic started 23 Oct 2014 07:43, by sgsracing Last Post 23 Oct 2014 22:57 by sgsracing	Replies:4 Views:3010	sgsracing Last Post by sgsracing 23 Oct 2014 22:57

Time to create page: 0.240 seconds