LinuxCNC + Orange Pi (allwincnc)

Bari
Offline
Platinum Member

5 years 2 months ago - 5 years 2 months ago #217028 by Bari

Replied by Bari on topic LinuxCNC + Orange Pi (allwincnc)

@wzor Please post your config.INI and .HAL files as well as any kernel config lines and version of Armbian and how you built it.

isolcpus= , idle-poll etc etc

Thank you!

Last edit: 5 years 2 months ago by Bari.

wzor
Offline
New Member

5 years 2 months ago #217029 by wzor

Replied by wzor on topic LinuxCNC + Orange Pi (allwincnc)

Bari, sorry ngc problem(((

envyvan
Offline
Senior Member

5 years 2 months ago #217030 by envyvan

Replied by envyvan on topic LinuxCNC + Orange Pi (allwincnc)

Link is update, Should be ok to download now.

taylorcmq
Offline
New Member

5 years 2 months ago #217060 by taylorcmq

Replied by taylorcmq on topic LinuxCNC + Orange Pi (allwincnc)

thanks, my board arrives today i will start testing!

Cncninja
Offline
Premium Member

5 years 2 months ago #217062 by Cncninja

Replied by Cncninja on topic LinuxCNC + Orange Pi (allwincnc)

What about the video drivers.. did you try? Im a little lost on of to install them do they make a difrance?

Dolence
Offline
Junior Member

5 years 2 months ago #217065 by Dolence

Replied by Dolence on topic LinuxCNC + Orange Pi (allwincnc)

Downloading your image. I will report back as soon as possible! Thank you!

envyvan wrote:
Link is update, Should be ok to download now.

Time to create page: 0.999 seconds