Schaublin 125-CNC retrofit.

Mark
Enjoyed watching another U- Tube Schaublin video . Sure miss the Maho videos , any chance of more Maho action ?
Have you thought about having a live feed ? Maybe have a viewer poll for live feed . :laugh:

I have used a aquarium small air pump to bubble the cleaning fluid during extended bearing or parts soaking . It provided a little agitation to the cleaning fluid over a lengthy soaking period .
Have read some of the concerns about using ultrasonic cleaning tanks for bearings . Always wondered if the bearings are in a preloaded state would the cautions still apply ? What do watch repair places use when cleaning a Patek Philippe Aquanaut ?

Machine moving

---

ww.casterhq.com/HRSP-GSPO-90G-p/hrsp-gspo-90g.htm 2200 thru 4400 Lbs( per set of 4 ) rated caster with adjustable leaveling height German Mfd. ? Blickle ? Add a missing " W " into the Web address .
Looks like something you could print a pattern an cast up with the foundry .
Bob

I haven't powered up the poor Maho for about 8 weeks now. Sooner or later I'll have to make up so new motor mounts though.

Good point about preloaded bearings in ultrasound. I have an ultrasound arriving next week, but only 10L, so the whole spindle wont fit.
Mark

Reinstalled the spindle...


Mark

And forgot the link to video ????

Weird. there is a bug in the forum software. If you embed the video with the "embed video" icon just above here

... it doesn't show it. Once I removed the video tabs it worked.
Mark

Hello everyone,
I really like your Projekt Mark.
Maybe a bit too much, because i bought the same machine today :lol:
Don‘t know about your current tailstock- and toolholder-situation but my Schaublin came with two pneumatic tailstocks and a huge amount of toolholders.
I‘m living close to munic, so maybe we could work something out.
Sorry if this is a bit of topic, but I was unable to contact Mark.

Lorenz