Z axis

6 years 5 months ago #166711 by motal2004

Replied by motal2004 on topic Z axis

This is what I get from terminal. See picture
I would copy paste but my web browser is saying address unreachable.

Please Log in or Create an account to join the conversation.

6 years 5 months ago - 6 years 5 months ago #166712 by phillc54

Replied by phillc54 on topic Z axis

You need linuxcnc and a space in front of that.

Edit: something like:

Code:

linuxcnc ~/linuxcnc/configs/azplasma/azplasma.ini

Last edit: 6 years 5 months ago by phillc54.

Please Log in or Create an account to join the conversation.

6 years 5 months ago #166713 by motal2004

Replied by motal2004 on topic Z axis

The “~” in The manual threw me off i’m getting somewhere now see picture. I’m trying to find this “in” pin

Please Log in or Create an account to join the conversation.

6 years 5 months ago #166714 by phillc54

Replied by phillc54 on topic Z axis

Can you post that file, you can click attachment at the bottom then drag and drop the file.

Please Log in or Create an account to join the conversation.

6 years 5 months ago #166715 by motal2004

Replied by motal2004 on topic Z axis

connection. hal file

Please Log in or Create an account to join the conversation.

6 years 5 months ago #166716 by phillc54

Replied by phillc54 on topic Z axis

In this line:

Code:

net plasmac:float-switch hm2_7i96.0.gpio.004.in in => debounce.0.0.in

you have an extra "in"

"~" means users home directory

Please Log in or Create an account to join the conversation.

Time to create page: 0.085 seconds