StepperOnline A6 Servo

29 Jul 2026 08:41 #348163 by Spezidrohne

Replied by Spezidrohne on topic StepperOnline A6 Servo

Yes, can Post it this afternoon. But Keeper ik mind it currently is configured for my bench test setup, and homes without homing Switches.

The following user(s) said Thank You: Jugo2

Please Log in or Create an account to join the conversation.

29 Jul 2026 12:11 #348167 by tommylight

Replied by tommylight on topic StepperOnline A6 Servo

All are for plasma machines, all tandem Y axis, all have home switches, and one is for parallel port.

The following user(s) said Thank You: Jugo2

Please Log in or Create an account to join the conversation.

30 Jul 2026 22:16 #348243 by Spezidrohne

Replied by Spezidrohne on topic StepperOnline A6 Servo

for my 4x A6 Ethercat servoswith 1kw each. and a ethercat catio module, and a mesa card.

The following user(s) said Thank You: rodw, 0x2102, Jugo2

Please Log in or Create an account to join the conversation.

30 Jul 2026 23:43 #348247 by tommylight

Replied by tommylight on topic StepperOnline A6 Servo

Sorry you did not mention for ethercat, mine are for Mesa and parallel port.

Please Log in or Create an account to join the conversation.

31 Jul 2026 07:22 - 31 Jul 2026 07:23 #348271 by Jugo2

Replied by Jugo2 on topic StepperOnline A6 Servo

Thanks Guys, My main problem is that Always Homed is not working, and the issue with Homing my dual Y Setup Precisely. :|

Last edit: 31 Jul 2026 07:23 by Jugo2.

Please Log in or Create an account to join the conversation.

31 Jul 2026 09:46 #348277 by rodw

Replied by rodw on topic StepperOnline A6 Servo

Jugo2 wrote:
Thanks Guys, My main problem is that Always Homed is not working, and the issue with Homing my dual Y Setup Precisely. :|

Re homing, please read this link until you understand it. Probably at least 6 times

Please Log in or Create an account to join the conversation.

Time to create page: 0.223 seconds