Advanced Search

Your consideration is much appreciated!! You're way too cool bud, thank you for what you've done for this community so far, no joke, it's EPIC <-- repost, take it.

Have a look and see if that's feasible. Problem on my side is not about keyboarding stuff but the Linuxcnc RTAI rather. I honestly wouldn't know where and how to test all that up, prolly would shave a month+ off my short life just to learn (min).

Side note; anyone telling you he/she's an expert in verilog and/or parallel-thinking is utterly lying to you. Bet there is only 5 persons on earth who master that brilliant e.e. mess of a codebase... (/rant_over lol)

if we get rid of the errors in the w5500, i would of course always prefer this interface to the esp, as it is faster, reduces the parts and you don't have to program the esp as well.
Of course, the (r)mii interface would be even better, but the w5500 will do for now

my knowledge of verilog is extremely limited and i would be happy to have someone with me who is more familiar with it.

I'm the last person who would complain about someone getting things to work in RIO that I'm too stupid for

i will test the new driver later at home, the integration into RIO is not so hard.

all what rio 'know' about the w5500 plugin is here:
riocore/plugins/w5500/

so, more or less, copy the new files into this folder and editing plugin.py:
changing list of verilog files:and add the new pin:
The only thing missing is this in the w5500.v:
sync: goes to 1 if a new package is received
pkg_timeout: goes to 1 if no package received for a while (parameter TIMEOUT)
tx_data: the data to send
rx_data: the received package

pkg_timeout is needed to trigger the error state of the CNC
sync is needed for multiplexed data
BUFFER_SIZE depends on the configuration and will be set while generating the rio.v

Hello everyone

I am having issues setting up my homing sequence for absolute encoders on my Ethercat servo dirves. I have read trough a few topics here on the forum but did not find the solution to my problem.

Background: I have Lichuan Ethercat servo drives with 23bit absolute encoders. From testing I have found out, that the encoder tracks 512 turns (-256 to +256) which combined with my 5 mm pitch ballscrews gives me a effective range of -1280 to +1280 mm. I need a distance of 0 to 1000 mm on my machine. On startup of LCNC, my encoder reports the correct absolute position of my axis. I have setup the homing sequence as follows:

To the issue: Let's say on startup I am at some random position e.g. 833 mm. LCNC now requires me to press the home button before I am able to switch to teleop mode or issue MDI commands. What happens now, is that the position of the axis is set to 0 and my two soft limits of 0 mm and 1000 mm are applied. This however is in my opinion not correct since the soft limits are now actually at 833 mm and 1833mm. This would lead to a crash if I were to move the axis. I need the homing sequence to keep the 833 mm absolute position value and apply the soft limits at the effective 0 mm and 1000 mm. Basically I need it to just set the "homed" flag and be done with it.

Hope I was able to describe issue somewhat clearly. Any ideas?

Thank you and greetings

Why is there stuff for parallel port?
If not, start over, make a new config, do not fill info at random.

Hi Arciera,

The feedrate is set from -100 to 0 to 100 % in the gui. It's like adaptive feed.

I have to add a overide like up to 120%, but that's peanut's to do.
If the feedrate is set at 100% the gcode feedrate is exact that value. For jogging it takes the gui settings page feedrate.
So at -100% the motion goe's in reverse, also doing reverse with endvelocity. Taking the vo as endvel.

Testing a surface, this file is huge so i did a memory preview cleanup first :


Ok after testing a few gcode files, i have seen a few things in the optimizing algo. I will document these and report.

meister wrote:

i prefer the WT32-ETH01, cheap and available

Understood, thanks for the advice/heads up. I have placed an order for the WT32-ETH01 and will receive this within 36~48hrs. I'll update. 

As important; For your review and consideration, Oliver.  I've quickly re-wrote a w5500 UDP protocol driver featuring a robust state machine and both a soft & hard reset (set on hard rst atm - preference). The SPI is a high-performance 50meg judging from the initial tests carried (see attached Gowin project/ZIP file). Additionally, please pardon my arrogance and persistence in trying to get this w5500 badboy to work; the reasoning behind is not fueled by my potential $1.99 investment losses (lol) I assure you, but more or less by the enthusiasm of that wizzy part being as simplistic as they come - let alone a ridiculously low-cost BOM and beyond ease for hardware implementation. All good reasons if RIO is to be adopted by makers like myself (iThink). 

You guessed; I wouldn't know where to begin neither would know how to implement this into RIOCore. Therefore I leave it to you to investigate that possibility (or feasibility rather).




 

That is nice that they used switches. Schaublin embeded Hall sensors into the bed of the 125-CNC. I hope they dont fail.

That makes sense.

Nice work.

I downsize pictures to 1000 pixels on the long side before uploading them.

Hello 
Can anyone share remora pinouts for nvem RT1052 board? 
I'm trying to set limit switches by adding :

net X-min remora.input.00 => joint.0.home-sw-in joint.0.neg-lim-sw-innet Y-min remora.input.02 => joint.1.home-sw-in joint.1.neg-lim-sw-innet Z-min remora.input.04 => joint.2.home-sw-in joint.2.neg-lim-sw-in

To my hal, but without proper pinout diagram I'm not sure which pin is for remora.input.00 etc. 
I've tried by connecting like on drawing in attachment, unfortunately without success.
Also is estop and probe pin counted as a inputs or separately? 

Dear All,

Figured it out with extended reading - thanks for this great forum! - and a bit of creative try-and-error.
All 3 axes are set up and calibrated, homing works like a charm
Next and last open issue is the spindle - but I don't expect much difficulty with that. Otherwise there'll be another post here ...

ORIGINAL POST:
I've started a project to convert a 30-year-old engraving machine (Gravograph UNICA) to LinuxCNC running on a Raspberry PI 4 with a MESA 7C80. I have several Gravograph machines of various sizes available and am looking to roll out my conversion to most of them, if it works out as planned. These machines may be old, but as such they're solid and reliable. Also they are simple as there's just one stepper and one limit switch per axis and the spindle motor to control. The main reason for conversion is that the UNICA machine only runs on it's own Gravograph-unique operating system with a tiny monochrome CRT screen and propietary keyboard, with no communication port. The other, larger machines can communicate via serial port, but they also require Gravograph-only software ...

So far, I got the Raspberry PI, 7C80 and LinuxCNC up and running to the point that the x-axis stepper is operational by using linuxcnc.hal and linuxcnc.ini from this thread:
forum.linuxcnc.org/42-deutsch/52725-3-ac...esa-7c80-und-raspi-4

As far as I can tell, there's no wizard available (stepconf etc.) for configuring the MESA 7C80, so I need to work with the config files directly(?)

I modified linuxcnc.ini so that the stepper runs smoothly, and added three lines for the limit switch and homing. The stepper now starts running when I home the machine in LinuxCNC, and the program is apparently waiting for the limit switch to be triggered.
This is where I'm currently insecure and would like to ask for assistance:

• What terminals to connect the limit switch to at the 7C80?
• How to set it up as a NC contact (Switch opens when x-axis home position is reached)?
• How to set up homing to move the spindle towards home at first if the home switch is not triggered, and then move a short distance away and back to the final home position? 
  
  This is my current linuxcnc.ini:
   

  File Attachment:

  File Name: linuxcnc.ini
  File Size:4 KB
  
   
  Thank you for reading and thanks in advance for any answers!
  
  Best regards,
  Erik 
  captain-panda

Yeah it seems that way.

More reading required. I've got a evaluation board on the way an old Diligent Spartan 3AN. So rather than trying to take everything at once I'll have a chance to "do little bits at a time". And not bother you so much
 
Thanks

Very nice! Congratulations.
How do you set the feed rate? Is there a feed rate override function built in?

I don't want the count - I want pulse + direction so I can combine decoded pulses from the quadrature encoder/MPG with pulses from other sources.