Advanced Search

emre@linuxcnc:~/vcp-template$ ./tutorial.sh
Venv Exists
Activate Venv
./tutorial.sh: line 104: /home/emre/.linuxcnc_venv/bin/activate: No such file or directory
Enter a name for the VCP or Q to quit vcp2
VCP Template files sourced from /home/emre/vcp-template
Copying the VCP Template to /home/emre/vcp2
+ pip install -e .
error: externally-managed-environment

× This environment is externally managed
╰─> To install Python packages system-wide, try apt install
    python3-xyz, where xyz is the package you are trying to
    install.
    
    If you wish to install a non-Debian-packaged Python package,
    create a virtual environment using python3 -m venv path/to/venv.
    Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make
    sure you have python3-full installed.
    
    If you wish to install a non-Debian packaged Python application,
    it may be easiest to use pipx install xyz, which will manage a
    virtual environment for you. Make sure you have pipx installed.
    
    See /usr/share/doc/python3.11/README.venv for more information.

note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages.
hint: See PEP 668 for the detailed specification.
+ set +x
Note: to edit the VCP in a terminal editvcp vcp2
Copy the Tutorial LinuxCNC Configuration Files? Yes No yes
Creating the Directory /home/emre/linuxcnc/configs/vcp2
Copying Sample Config Files from /home/emre/vcp-template/basic_vcp/ to /home/emre/linuxcnc/configs/vcp2

auto enp2s0
iface enp2s0 inet manual
        hardware-irq-coalesce-rx-usecs 0
        pre-up /sbin/ifconfig $IFACE up
        post-down /sbin/ifconfig $IFACE down