Gmoccapy - A new screen for linuxcnc

Hallo Tom,

What release of Gmoccapy do you use?
I will check as soon as possible.

Norbert

P.S. could someone else try to reproduce that?

Hi Norbert, sorry for the delay, i've been away for the weekend. I've tried 1.3.1 and 1.3.2 and they both show the same behaviour. Doesn't look like anyone else has the same issue though..

Many thanks, Tom

Hallo Tom,

could you zip your config folder and mail it to me?

Have you tested on an other computer?

Norbert

Hi, I can, it's a bit of a mess though...

I have tried it on a couple of computers. In each case I started from the Debian iso 2.6.3 and Gmoccapy 1.2 (which didn't have the problem).

I have tried 2.7 with Gmo 1.3.2 (from GIT) and 2.6.4 with 1.3.1? Both with the Sim configs. They all behave the same way.

I can zip my config folder tomorrow. Would you rather my real machine config or the Gmoccapy sim?

Today I was looking for the 'reload program' button. Where is that one hidden?

Hallo Tom,

If it happen also in a new sim, i do not need your config, as it does not happen here.

Could someone else please tedt if show_keybord_on_... are working as expected?

Norbert