Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

5 months 1 day ago #346779 by RMJ fabrication

Replied by RMJ fabrication on topic Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

I still get the same error after disabling eee

Please Log in or Create an account to join the conversation.

5 months 1 day ago #346781 by PCW

Replied by PCW on topic Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

is the

ip a

result still reasonable?

What is the host hardware?

Please Log in or Create an account to join the conversation.

5 months 1 day ago #346782 by RMJ fabrication

Replied by RMJ fabrication on topic Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

I am not sure how do I find host hardware?

Please Log in or Create an account to join the conversation.

5 months 1 day ago #346783 by RMJ fabrication

Replied by RMJ fabrication on topic Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

So some background information my plasma table electronics and mesa 7i76e are not new the PC is new a newer HP elite 8300 USDT I swapped it out recently following issues with this post forum.linuxcnc.org/plasmac/53087-qtplasm...e-0-in-middle-of-cut

Please Log in or Create an account to join the conversation.

5 months 1 day ago #346784 by PCW

Replied by PCW on topic Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

OK a 8300 USDT uses Intel hardware and should be fine

Is AMT disabled in the BIOS?

Please Log in or Create an account to join the conversation.

5 months 1 day ago #346785 by RMJ fabrication

Replied by RMJ fabrication on topic Ethernet connection to Mesa 7i76e disconnecting on its own after one minute

My bad the PC is actually a HP Elitedesk 800 G1 USDT

AMT is not disabled in BIOS where can I find those settings?

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540

Time to create page: 1.115 seconds