Material Settings Glitch

More
16 Feb 2020 21:52 #157522 by snowgoer540
When I save the changes with regard to the THC in the materials area, it sometimes reverts them back to what I had changed them from before I had pressed "Save".

In the linked example, I unchecked "Use Auto Volts" and clicked "Save", which causes it to recheck "Use Auto Volts".

Save Issue

Any ideas?

Please Log in or Create an account to join the conversation.

More
16 Feb 2020 22:50 - 16 Feb 2020 23:05 #157526 by phillc54
Replied by phillc54 on topic Material Settings Glitch
I haven't been able to duplicate that behaviour.

Could you check in your ini file for [PLASMAC]LAST_UPGRADE and report the version.

Edit: A better version check is:

Buildbot Installation:
$  man plasmac

Run In Place Installation:
$ source ~/linuxcnc-dev/scripts/rip-environment && man plasmac
Last edit: 16 Feb 2020 23:05 by phillc54.

Please Log in or Create an account to join the conversation.

More
16 Feb 2020 23:08 #157529 by snowgoer540
Phil,

LAST_UPGRADE = 0.090

I believe I ran it last before you pushed this latest update.

Please Log in or Create an account to join the conversation.

More
17 Feb 2020 00:34 #157532 by phillc54
Replied by phillc54 on topic Material Settings Glitch
It may be worthwhile doing an upgrade although I can't see any changes since 0.90 that would have any effect on your issue.

This is the grasping at straws answer I know, but...

Please Log in or Create an account to join the conversation.

More
17 Feb 2020 02:48 #157551 by snowgoer540

It may be worthwhile doing an upgrade although I can't see any changes since 0.90 that would have any effect on your issue.

This is the grasping at straws answer I know, but...


I'm willing to try anything, and I certainly appreciate the things to try. The weird thing is that I had this problem before, updated, it went away for a bit and now it's back. I've no idea where to look, code wise, to see if there's anything that might cause the unexpected behavior. When it comes to breaking software, somehow I'm your man lol.

Thanks again.

-Greg

Please Log in or Create an account to join the conversation.

More
17 Feb 2020 02:50 #157553 by phillc54
Replied by phillc54 on topic Material Settings Glitch

When it comes to breaking software, somehow I'm your man lol.

Cool, you can be the bug finder...

Please Log in or Create an account to join the conversation.

More
17 Feb 2020 11:24 #157583 by snowgoer540

When it comes to breaking software, somehow I'm your man lol.

Cool, you can be the bug finder...


I'm game. Just ask the PathPilot guys, I annoy...err...contribute there regularly. Always happy to help how I can.

Please Log in or Create an account to join the conversation.

More
18 Feb 2020 17:00 #157731 by snowgoer540
So I updated to the latest last night, and I was able to better define/replicate the issue.

As it turns out, it doesn’t do it on the 00000 default material. But it does on any of the added materials. If I switch back to the default the problem goes away. See the YouTube link below.

I know enough coding to be dangerous... if you point me where to look I’m happy to try to look line by line in the code and see if anything jumps out at me.



-Greg

Please Log in or Create an account to join the conversation.

More
18 Feb 2020 22:30 - 18 Feb 2020 22:41 #157772 by phillc54
Replied by phillc54 on topic Material Settings Glitch

So I updated to the latest last night, and I was able to better define/replicate the issue.

As it turns out, it doesn’t do it on the 00000 default material. But it does on any of the added materials. If I switch back to the default the problem goes away. See the YouTube link below.

Thanks for that, it does do the same here. I will look into it.

Edit: Actually it is wrong for everything below THC disabled/Auto/Enabled
Last edit: 18 Feb 2020 22:41 by phillc54.

Please Log in or Create an account to join the conversation.

More
18 Feb 2020 22:48 #157777 by snowgoer540

So I updated to the latest last night, and I was able to better define/replicate the issue.

As it turns out, it doesn’t do it on the 00000 default material. But it does on any of the added materials. If I switch back to the default the problem goes away. See the YouTube link below.

Thanks for that, it does do the same here. I will look into it.

Edit: Actually it is wrong for everything below THC disabled/Auto/Enabled


Ah that’s good to know. Glad to know I’m not going crazy!

If I can be of any help, please let me know.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.327 seconds
Powered by Kunena Forum