Photos

  • phillc54
  • phillc54's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
23 Apr 2020 01:46 #165173 by phillc54
Photos was created by phillc54
A place to post photos of cuts you have achieved with PlasmaC.
The following user(s) said Thank You: tommylight, thefabricator03

Please Log in or Create an account to join the conversation.

More
23 Apr 2020 07:07 #165189 by bbsr_5a
Replied by bbsr_5a on topic Photos
Thank you to all How made this Possible
Attachments:
The following user(s) said Thank You: phillc54, tommylight, thefabricator03, CNCFred

Please Log in or Create an account to join the conversation.

More
23 Apr 2020 08:37 - 23 Apr 2020 08:40 #165199 by taloot
Replied by taloot on topic Photos


last 2 picture done with special chinese plasma
Attachments:
Last edit: 23 Apr 2020 08:40 by taloot.
The following user(s) said Thank You: phillc54, joekline9, tommylight, thefabricator03, CNCFred, pinder

Please Log in or Create an account to join the conversation.

More
23 Apr 2020 10:03 - 23 Apr 2020 10:03 #165201 by Clive S
Replied by Clive S on topic Photos

A place to post photos of cuts you have achieved with PlasmaC.


It would be nice to have thickness and cut details as well :)
Last edit: 23 Apr 2020 10:03 by Clive S.
The following user(s) said Thank You: phillc54, tommylight, CNCFred

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Offline
  • Platinum Member
  • Platinum Member
More
23 Apr 2020 11:06 #165217 by thefabricator03
Replied by thefabricator03 on topic Photos
This was todays work. 25mm plate.

Attachments:
The following user(s) said Thank You: phillc54, tommylight, Clive S, CNCFred

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Offline
  • Platinum Member
  • Platinum Member
More
23 Apr 2020 11:18 #165219 by thefabricator03
Replied by thefabricator03 on topic Photos
I cut these for a project. They are decorative outriggers. Cut from 1.6 hot rolled sheet. I welded them and then ground them flush and had them powder coated.

Attachments:
The following user(s) said Thank You: phillc54, tommylight, Clive S, CNCFred, WinstonTodge

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Offline
  • Platinum Member
  • Platinum Member
More
23 Apr 2020 11:18 #165220 by thefabricator03
Replied by thefabricator03 on topic Photos
Attachments:
The following user(s) said Thank You: phillc54, tommylight, CNCFred, WinstonTodge, Coachbuilder

Please Log in or Create an account to join the conversation.

More
23 Apr 2020 11:22 #165221 by tommylight
Replied by tommylight on topic Photos
@thefabricator03
Those are some nice cuts! :)
You do some really nice work.
The following user(s) said Thank You: thefabricator03, CNCFred

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Offline
  • Platinum Member
  • Platinum Member
More
23 Apr 2020 11:23 #165222 by thefabricator03
Replied by thefabricator03 on topic Photos
Thanks Tom
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
23 Apr 2020 11:26 #165224 by tommylight
Replied by tommylight on topic Photos
You are welcomed, always.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.544 seconds
Powered by Kunena Forum