1. User Interfaces
  3. Plasmac
  5. Photos

Photos

More
02 Aug 2020 03:51 - 02 Aug 2020 03:51 #176852 by phillc54
Replied by phillc54 on topic Photos
Is that gcode available? Unfortunately my wife saw it and apparently she needs one...
Last edit: 02 Aug 2020 03:51 by phillc54.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 03:52 - 02 Aug 2020 03:54 #176853 by thefabricator03
Replied by thefabricator03 on topic Photos
I am sure one will turn into a sheets worth... My wife does that to me often.
Last edit: 02 Aug 2020 03:54 by thefabricator03.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 03:54 #176854 by dvn4life1972
Replied by dvn4life1972 on topic Photos
Sure, I'll log in from my laptop and attach it.

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 03:55 #176855 by phillc54
Replied by phillc54 on topic Photos

I am sure one will turn into a sheets worth...

HaHa, yeah probably. I think I need to keep the office door locked when I am looking at this stuff.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 04:02 #176857 by dvn4life1972
Replied by dvn4life1972 on topic Photos
Here goes. I actually have some 3 or 4 year old parts (same butterfly .dxf) that came off a industrial laser. While the quality is definitely better, the plasma one from today is very close in quality IMO. I'll dig it out and do a comparison pic or two.

Attached the file...
Attachments:
The following user(s) said Thank You: billykid, phillc54, Clive S

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 04:06 #176859 by phillc54
Replied by phillc54 on topic Photos
Thanks for that, I appreciate it.
The following user(s) said Thank You: dvn4life1972

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 07:47 - 02 Aug 2020 07:51 #176869 by Clive S
Replied by Clive S on topic Photos
Many thanks I will give it a go. It will probably come out 25.4 times as big :woohoo: :laugh:
Last edit: 02 Aug 2020 07:51 by Clive S.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 07:50 #176870 by phillc54
Replied by phillc54 on topic Photos
Be carefull Clive, if you do cut imperial gcode on a metric machine then you need to set up an imperial material to suit.

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 07:52 - 02 Aug 2020 07:54 #176871 by Clive S
Replied by Clive S on topic Photos

Be carefull Clive, if you do cut imperial gcode on a metric machine then you need to set up an imperial material to suit.


Yes of course I never thought of that !! This might overtake the spanner :cheer:
Last edit: 02 Aug 2020 07:54 by Clive S.

Please Log in or Create an account to join the conversation.

More
02 Aug 2020 07:54 #176873 by phillc54
Replied by phillc54 on topic Photos

Be carefull Clive, if you do cut imperial gcode on a metric machine then you need to set up an imperial material to suit.


Yes of course I never thought of that !!

It is one of the items on the todo list...

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
  1. User Interfaces
  3. Plasmac
  5. Photos
Time to create page: 0.632 seconds
Powered by Kunena Forum