Some thoughts and some findings using PlasmaC

Did plenty of testing yesterday with the new "hush hush" PlasmaC comp with the arcok lost delay set at 0.3 sec and could not make it fail !
You never heard this from me !

tommylight wrote: Did plenty of testing yesterday with the new "hush hush" PlasmaC comp with the arcok lost delay set at 0.3 sec and could not make it fail !
You never heard this from me !

I did hear from you about some new PlasmaC comp
:woohoo:

pinder wrote: I did hear from you about some new PlasmaC comp
:woohoo:

Who me ? No one but chicken here !

Hi, yesterday I updated the plasmac and cut several sheets, and there were no problems with the float-switch sensor triggering when the torch ignition.
So the update "disable ohmic and float fault sensing until arc ok" works fine.
Thanks Phill

I just got my plasmac machine up and running and seems to have tons of little bugs... mostly with torch starts now but I was having float switch issues.

Reading through this thread it seems most of my issues should be resolved with this update! Super new to Linux so I’m glad there is a large support base here to help newbies like me.