Сustomization QTvcp

More
6 years 5 months ago - 6 years 5 months ago #168937 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Hello! Is it possible to add such a RUN FROM LINE option to QtVCP?
This will be perfect. Thank.
Attachments:
Last edit: 6 years 5 months ago by hottabich.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #169036 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Chris and Jim I congratulate you, you have created the most good and functional interface! I just rearranged the pictures in places. Thank you so much.
Wee gold specialists and people too.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #169183 by cmorley
Replied by cmorley on topic Сustomization QTvcp
I thought you had run-from-line working already?

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #169281 by hottabich
Replied by hottabich on topic Сustomization QTvcp
NO_FORCE_HOMING = 1. Axis Y error. How to fix?
Attachments:

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #169285 by tommylight
Replied by tommylight on topic Сustomization QTvcp
Do you have 2 motors for the same axis ?
That is the error displayed when you try to move a gantry machine with two motors on the same axis, it will not move without homing the machine first.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #169292 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Simulator error sim.qtdragon_xyza.

Please Log in or Create an account to join the conversation.

Moderators: cmorley
Time to create page: 1.036 seconds
Powered by Kunena Forum