Schaublin 125-CNC retrofit.

More
4 years 11 months ago - 4 years 11 months ago #226361 by RotarySMP
Replied by RotarySMP on topic Schaublin 125-CNC retrofit.
It is returning "no 7i92 board found",
but if I do

halrun
loadrt hostmot2
loadrt hm2_eth board_ip=10.10.10.10
show pin

I get a fully functioning 7i92. Could this still be the outdated mesaflash issue? The installation is the latest 2.8.2 Buster ISO.
Last edit: 4 years 11 months ago by RotarySMP.

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226362 by RotarySMP
Replied by RotarySMP on topic Schaublin 125-CNC retrofit.
Forget it. I had an extra space between -- and addr!

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226449 by RotarySMP
Replied by RotarySMP on topic Schaublin 125-CNC retrofit.
I wanted this video to be a victory of man over machine, but again, the machine won.

The following user(s) said Thank You: arvidb

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226451 by anfänger
Replied by anfänger on topic Schaublin 125-CNC retrofit.
This always one of my gigots fears, forgetting a jumper or frying one of the cards while testing. I hope It's a simple fix.
The following user(s) said Thank You: RotarySMP

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226453 by RotarySMP
Replied by RotarySMP on topic Schaublin 125-CNC retrofit.
Peter has given me a suggestion of how to localise the fried component. Worst case I'll have to buy a replacement. Stupid of me.
Mark

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226464 by anfänger
Replied by anfänger on topic Schaublin 125-CNC retrofit.
good luck there.
On my lathe I have fuses to protect the mesa cards if shorted.
And you reminded me to do the same on my running project.

Please Log in or Create an account to join the conversation.

Time to create page: 0.369 seconds
Powered by Kunena Forum