Traub Bosch cc100 retrofit
07 Jul 2014 14:43 #48472
by aventtini
Replied by aventtini on topic Traub Bosch cc100 retrofit
i have scan the documets of the milling machine . I found out they are analog 
so its just some small detalies what to order .
What do you recomand ? My only problems is the encoders if they will be what is needed
www.docdroid.net/eeeb/schema-traub-gloria.pdf.html
so its just some small detalies what to order .What do you recomand ? My only problems is the encoders if they will be what is needed
www.docdroid.net/eeeb/schema-traub-gloria.pdf.html
Please Log in or Create an account to join the conversation.
09 Jul 2014 02:08 #48546
by aventtini
Replied by aventtini on topic Traub Bosch cc100 retrofit
6I25/7I77 it will be the solution , now hope it will be no problem . This CNC is not that complcated i know that the Spindle module is analog and i need to connect the brake and the position for tool change analogic . Its posible to connect the user panel to the PC that is the funny part . I have read some info on forms and sometimes old panels ar not that simple to integrate.
. I have read some info on forms and sometimes old panels ar not that simple to integrate. Please Log in or Create an account to join the conversation.
09 Jul 2014 05:57 #48552
by andypugh
Have a look at the 7i73, that supports encoders and analogue inputs and matrix-wired keypads (note that keys don't need to be physically in a matrix to be wired that way, and wiring that way lets you run 64 keys from 16 IO pins)
It has rather a baffling array of operating modes
Replied by andypugh on topic Traub Bosch cc100 retrofit
6I25/7I77 it will be the solution , now hope it will be no problem . This CNC is not that complcated i know that the Spindle module is analog and i need to connect the brake and the position for tool change analogic . Its posible to connect the user panel to the PC that is the funny part
Have a look at the 7i73, that supports encoders and analogue inputs and matrix-wired keypads (note that keys don't need to be physically in a matrix to be wired that way, and wiring that way lets you run 64 keys from 16 IO pins)
It has rather a baffling array of operating modes
Please Log in or Create an account to join the conversation.
09 Jul 2014 19:10 #48578
by aventtini
Replied by aventtini on topic Traub Bosch cc100 retrofit
i just order today 6I25/7I77 + 7i73 . Hope it will be a good plan .
I have no info about the soprel drives from the tool changer , mybe its analogic and i save them . I have read the manual of linuxcnc and its complicated to set it up . Hope i get some help from forum . I will make a new Topic about the retrofit .
I have no info about the soprel drives from the tool changer , mybe its analogic and i save them . I have read the manual of linuxcnc and its complicated to set it up . Hope i get some help from forum . I will make a new Topic about the retrofit .
Please Log in or Create an account to join the conversation.
23 Jul 2014 02:40 #49032
by aventtini
Replied by aventtini on topic Traub Bosch cc100 retrofit
It just arrive today. Now the fun part i will post some pictures . I was reading for a week and i understand its hard to solve the tool changer . Lets give a try how much can we brake ))
i will post some pictures . I was reading for a week and i understand its hard to solve the tool changer . Lets give a try how much can we brake )) Please Log in or Create an account to join the conversation.
Time to create page: 0.088 seconds