Another plasma component...

Phill

I started and did a fresh clone and build of the plasmac branch because of the merging the new master. Started to test and get the following error:
I checked for the pin and sure enough it isn't there.

John

@John,

For now you can outcomment with the # sign for python code if there is non related code to involved to this line.
Other option is to connect a fake pin with the net command in one of the hal files. "net fakepin plasmac_monitor.thd-led yourmesafakepin"

I checked for the pin and sure enough it isn't there.

John,
Sorry about that. When I was trying to sort reverse-run I was doing plasmac stuff in a different directory and forgot to copy the new plasmac_monitor.glade...
I have just pushed the fix.
If you don't want to git pull then just change the name of the thc led to thc-led and the associated label to thc-label in the glade file.

Cheers, Phill.

Phill

Thanks! It's not a problem, I figured you would want to know about it ASAP. We had rain showers this afternoon so I pull a painting project into the shop. I will try and cut a few sheets tomorrow.

John

Phill

Cut two sheets today, 100% yield. Everything worked well. Like having the glaring torch enable button back. Tri color THC led gets the job done.

John

Just pulled the latest and greatest and tried to build a new config. It takes a long time to load, and when it finally does it gives me this error and it loads the wrong gmoccapy then quits. This is just a bare bones config straight off the configurator.

image missing https://i.imgur.com/aL4jQ3l.png
zoom