General LinuxCNC Questions 6111 topics

Questions about LinuxCNC

Subject	Replies / Views	Last Post
Retro fitting Topic started 09 Nov 2024 16:02, by PF2Design Last Post 09 Nov 2024 16:13 by tommylight	Replies:1 Views:755	Last Post by tommylight 09 Nov 2024 16:13
LinuxCNC Error Topic started 05 Nov 2024 06:23, by Micro2000 Last Post 08 Nov 2024 19:01 by Micro2000 1 2 3	Replies:20 Views:2582	Micro2000 Last Post by Micro2000 08 Nov 2024 19:01
Execute G-code when triggered by an external input (on parallel port input pin) Topic started 08 Nov 2024 09:34, by sk_linuxcnc Last Post 08 Nov 2024 11:41 by sk_linuxcnc	Replies:2 Views:739	sk_linuxcnc Last Post by sk_linuxcnc 08 Nov 2024 11:41
/usr/share/linuxcnc/hallib/lathe.hal error Topic started 06 Nov 2024 04:56, by Levi Last Post 07 Nov 2024 22:48 by Levi	Replies:2 Views:793	Levi Last Post by Levi 07 Nov 2024 22:48
Mesaflash not possible - no 7i96s card found Topic started 06 Nov 2024 21:53, by sin-do-re Last Post 07 Nov 2024 15:15 by PCW	Replies:3 Views:745	Last Post by PCW 07 Nov 2024 15:15
Mint 22 with stock kernel preempt=dynamic works flawlessly with 7i76e Topic started 06 Nov 2024 10:51, by zack Last Post 06 Nov 2024 15:58 by zack	Replies:4 Views:1071	Last Post by zack 06 Nov 2024 15:58
change the ini with the axis interface open Topic started 30 Oct 2024 01:02, by Thayloreing Last Post 06 Nov 2024 15:42 by Aciera	Replies:4 Views:762	Last Post by Aciera 06 Nov 2024 15:42
Cannot stat/ no such file or directory Topic started 29 Oct 2024 03:47, by Micro2000 Last Post 06 Nov 2024 02:59 by Micro2000 1 2	Replies:12 Views:2436	Micro2000 Last Post by Micro2000 06 Nov 2024 02:59
mb2hal sets up float pins. Can this be fixed? Topic started 31 Dec 2015 21:07, by Simpson36 Last Post 05 Nov 2024 14:14 by Aciera 1 2 3	Replies:22 Views:6482	Last Post by Aciera 05 Nov 2024 14:14
Ye old *axis following error... Topic started 02 Oct 2024 04:03, by M4MazakUser Last Post 04 Nov 2024 00:14 by tommylight 1 2	Replies:10 Views:1868	Last Post by tommylight 04 Nov 2024 00:14
Program restart wipes g61 Topic started 03 Nov 2024 22:56, by M4MazakUser Last Post 03 Nov 2024 23:00 by M4MazakUser	Replies:1 Views:511	M4MazakUser Last Post by M4MazakUser 03 Nov 2024 23:00
Ignore hard and or softlimits for toolchange Topic started 03 Nov 2024 10:10, by anfänger Last Post 03 Nov 2024 15:12 by anfänger	Replies:4 Views:834	Last Post by anfänger 03 Nov 2024 15:12
Integrating a CHC-200F Capacitive sensor as a THC Topic started 02 Nov 2024 22:36, by sin-do-re Last Post 03 Nov 2024 01:48 by tommylight	Replies:2 Views:1012	Last Post by tommylight 03 Nov 2024 01:48
Carte d'adaptateur PCI Express vers parallèle DB25 Topic started 02 Nov 2024 18:25, by jfwillem Last Post 03 Nov 2024 01:43 by tommylight	Replies:1 Views:513	Last Post by tommylight 03 Nov 2024 01:43
Help with Denford Machine config Topic started 26 Oct 2024 12:50, by Nixus Last Post 02 Nov 2024 15:34 by Nixus	Replies:7 Views:1002	Nixus Last Post by Nixus 02 Nov 2024 15:34
Help to understand axes directions Topic started 01 Nov 2024 01:22, by rmavalente Last Post 02 Nov 2024 09:14 by rmavalente	Replies:9 Views:697	rmavalente Last Post by rmavalente 02 Nov 2024 09:14
How to add a PCI card paralell and serial ports to an ASUS pc for debian linuxc Topic started 01 Nov 2024 01:19, by martyop Last Post 02 Nov 2024 02:20 by martyop	Replies:2 Views:611	martyop Last Post by martyop 02 Nov 2024 02:20
Mill has been running fine for years, all of a sudden I get the following error Topic started 31 Oct 2024 20:25, by B.Reilly01 Last Post 01 Nov 2024 22:25 by B.Reilly01	Replies:4 Views:830	B.Reilly01 Last Post by B.Reilly01 01 Nov 2024 22:25
Raspberry pi 4 problems Topic started 01 Nov 2024 07:26, by Philip Lydin Last Post 01 Nov 2024 19:51 by PCW	Replies:1 Views:603	Last Post by PCW 01 Nov 2024 19:51
Maximum step rate with MESA Topic started 01 Nov 2024 05:17, by rajsekhar Last Post 01 Nov 2024 18:30 by PCW	Replies:4 Views:1072	Last Post by PCW 01 Nov 2024 18:30

Time to create page: 0.392 seconds