Photos

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
27 Feb 2021 21:23 #200347 by tommylight
Replied by tommylight on topic Photos

Maybe you need an ass scratcher to add to your collection too :)

:)
Oh yes yes, been sitting to long lately.... usually i never sit, even when eating.

Please Log in or Create an account to join the conversation.

More
27 Feb 2021 22:35 #200356 by crowloy
Replied by crowloy on topic Photos

The first being a back scratcher which I don't have any pics of.


The wonderful powers of Plasmac!

My second cut was still a headscratcher! (preplasmac)

Back scratcher, head scratcher, i am lost ! :)
Very nice, indeed.
Thank you.


Maybe you need an ass scratcher to add to your collection too :)


oouch
The following user(s) said Thank You: tommylight, rodw, CNCFred

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Offline
  • Platinum Member
  • Platinum Member
More
03 Apr 2021 06:32 - 03 Apr 2021 06:42 #204592 by thefabricator03
Replied by thefabricator03 on topic Photos
PlasmaC has helped me with another project. I would of spent 45 minutes in total designing and cutting the plate parts, PlasmaC just works!

Last edit: 03 Apr 2021 06:42 by thefabricator03.
The following user(s) said Thank You: phillc54, tommylight, Clive S, rodw, CNCFred, snowgoer540, dvn4life1972, RNJFAB

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
03 Apr 2021 20:38 #204662 by tommylight
Replied by tommylight on topic Photos
I have the same thin but much skinnier i built some 10 years ago for lifting the bikes, it uses 2 of satellite dish motors !
Nicely done maestro.
The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

More
05 Apr 2021 23:50 #204996 by andypugh
Replied by andypugh on topic Photos
Bike lift:
(my first, and last, I hope, feature-length video)
The following user(s) said Thank You: billykid, phillc54, tommylight, Clive S, thefabricator03, CNCFred, Arnold

Please Log in or Create an account to join the conversation.

More
31 Dec 2021 14:13 #230391 by billykid
Replied by billykid on topic Photos
good job !! but put grease on the motorcycle chain

Please Log in or Create an account to join the conversation.

  • Clive S
  • Away
  • Platinum Member
  • Platinum Member
More
31 Dec 2021 16:23 #230396 by Clive S
Replied by Clive S on topic Photos
Very nice indeed, I have seen it before and watched it to the end.

May I ask what was the reason to have an upstand on the floor as a trip hazard. Could it have been done with a blanking plug to fit in flush.
 

Please Log in or Create an account to join the conversation.

More
02 Jan 2022 01:39 - 02 Jan 2022 01:40 #230510 by RNJFAB
Replied by RNJFAB on topic Photos
Made some fishing rod holders the other day. 1.6mm steel. Quite impressed with the lack of dross on the cuts now I have a proper torch on the CNC.
Attachments:
Last edit: 02 Jan 2022 01:40 by RNJFAB.
The following user(s) said Thank You: tommylight, dvn4life1972

Please Log in or Create an account to join the conversation.

More
26 Feb 2022 13:41 - 26 Feb 2022 13:43 #235845 by Jflesburg
Replied by Jflesburg on topic Photos
A couple of brackets I cut out then welded together to motorize a bead roller.Now I want to make my table larger for more travel.

 





A link to the video.
 
Attachments:
Last edit: 26 Feb 2022 13:43 by Jflesburg.
The following user(s) said Thank You: tommylight, dvn4life1972

Please Log in or Create an account to join the conversation.

More
26 Feb 2022 19:35 #235862 by rodw
Replied by rodw on topic Photos
Nice table. Could you share a photo of your torch holder? I have to make something like that for the same torch.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.231 seconds
Powered by Kunena Forum