Ethercat HAL driver

More
5 years 3 weeks ago #222671 by Black16
Replied by Black16 on topic Ethercat HAL driver
No. Link please?

Please Log in or Create an account to join the conversation.

More
5 years 3 weeks ago #222677 by db1981
Replied by db1981 on topic Ethercat HAL driver
github.com/sittner/ec-debianize

forum.linuxcnc.org/ethercat/35591-beckho...uxcnc-how-to-install

Please Log in or Create an account to join the conversation.

More
5 years 3 weeks ago #222698 by Black16
Replied by Black16 on topic Ethercat HAL driver
Dominik Braun many thanks. Thanks to you, everything worked out.

Please Log in or Create an account to join the conversation.

More
5 years 2 weeks ago #223388 by ASKoskov
Replied by ASKoskov on topic Ethercat HAL driver
Hello. Please help. I'm trying to configure module 11. Modules 1-10 are working. Since 11 I can't figure out where to substitute idx.
Attachments:

Please Log in or Create an account to join the conversation.

More
5 years 2 weeks ago #223391 by db1981
Replied by db1981 on topic Ethercat HAL driver
typos,
you need to add an / at your pdo entry lines.

<pdoEntry idx="6000" subIdx="1" bitlen="1" halType="bit">

should be:

<pdoEntry idx="6000" subIdx="1" bitlen="1" halType="bit" />
The following user(s) said Thank You: ASKoskov

Please Log in or Create an account to join the conversation.

More
5 years 2 weeks ago #223395 by ASKoskov
Replied by ASKoskov on topic Ethercat HAL driver
Thank you fixed it, the error remained refers to line 20.
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.450 seconds
Powered by Kunena Forum