StepConf Wizard 589 topics

Stepper Configuration Wizard for Parallel Port

Forum Header

Subject	Replies / Views	Last Post
Z-axis not working on lathe & mill Topic started 17 Jul 2018 15:29, by derekmac Last Post 18 Jul 2018 15:26 by derekmac	Replies:4 Views:1336	derekmac Last Post by derekmac 18 Jul 2018 15:26
Limit Axis resolution Topic started 03 Jul 2018 09:02, by Ralf Last Post 07 Jul 2018 06:26 by Ralf	Replies:2 Views:1235	Last Post by Ralf 07 Jul 2018 06:26
Limit switches not working Topic started 02 Jun 2018 15:17, by Jocman Last Post 05 Jul 2018 07:10 by Jocman	Replies:6 Views:3338	Jocman Last Post by Jocman 05 Jul 2018 07:10
Bridgeport cnc with pmdx 126 and 134 Topic started 28 Jun 2018 20:58, by Josh113 Last Post 29 Jun 2018 13:27 by tecno	Replies:5 Views:1429	Last Post by tecno 29 Jun 2018 13:27
Latency Test results Topic started 13 Jun 2018 07:04, by justinj Last Post 13 Jun 2018 12:30 by andypugh	Replies:1 Views:1452	Last Post by andypugh 13 Jun 2018 12:30
spindle calibration Topic started 06 Jun 2018 00:42, by ericg Last Post 07 Jun 2018 16:27 by andypugh	Replies:2 Views:1370	Last Post by andypugh 07 Jun 2018 16:27
Error stepconfig for lathe Topic started 22 May 2018 19:45, by Aleks Last Post 31 May 2018 19:12 by cmorley	Replies:9 Views:1661	cmorley Last Post by cmorley 31 May 2018 19:12
Parallel limit switch connection problem Topic started 13 May 2018 13:27, by caseyryan Last Post 20 May 2018 13:57 by cmorley 1 2	Replies:19 Views:4233	cmorley Last Post by cmorley 20 May 2018 13:57
Forward Step / Backward Step - Vexta Question Topic started 13 Mar 2018 13:33, by BrendaEM Last Post 12 May 2018 18:10 by BrendaEM 1 2 3 4	Replies:33 Views:6303	BrendaEM Last Post by BrendaEM 12 May 2018 18:10
Automatic Parallel Port Tester from StepConfig Topic started 22 Apr 2018 21:57, by shipmodeller Last Post 02 May 2018 21:39 by andypugh	Replies:7 Views:2009	Last Post by andypugh 02 May 2018 21:39
Axis "home all" instead of "home axis" Topic started 27 Mar 2018 21:51, by Kowalski Last Post 28 Mar 2018 17:07 by Kowalski	Replies:2 Views:1708	Kowalski Last Post by Kowalski 28 Mar 2018 17:07
Setting up a gantry with 4 joints and 3 axes Topic started 25 Feb 2018 19:15, by Abe Last Post 26 Mar 2018 03:15 by rodw 1 2	Replies:16 Views:6743	Last Post by rodw 26 Mar 2018 03:15
lathe help Topic started 18 Mar 2018 16:45, by warwickben Last Post 23 Mar 2018 23:20 by verticalperformance 1 2	Replies:16 Views:3575	Last Post by verticalperformance 23 Mar 2018 23:20
5 axis foam cutter configuration: ini, hal Topic started 10 Mar 2018 22:04, by Kowalski Last Post 12 Mar 2018 00:51 by Todd Zuercher	Replies:3 Views:1908	Last Post by Todd Zuercher 12 Mar 2018 00:51
Velocity and Acceleration settings as well as table travel nos for a RF30 mill Topic started 28 Feb 2018 16:13, by stioc Last Post 06 Mar 2018 09:07 by andypugh 1 2	Replies:11 Views:3850	Last Post by andypugh 06 Mar 2018 09:07
BOB ZP5A-INT and input troubles Topic started 28 Feb 2018 13:56, by Jocman Last Post 05 Mar 2018 09:26 by Jocman	Replies:9 Views:1567	Jocman Last Post by Jocman 05 Mar 2018 09:26
Can't get stepper motors to move at all Topic started 27 Jan 2018 20:58, by mpayne Last Post 27 Jan 2018 23:18 by Clive S	Replies:7 Views:2419	Clive S Last Post by Clive S 27 Jan 2018 23:18
configuring LinuxCNC for DB25 1205 b.o.b.-is it possible? Topic started 01 Jan 2018 17:40, by routerdriver Last Post 21 Jan 2018 16:51 by eFalegname	Replies:2 Views:2919	Last Post by eFalegname 21 Jan 2018 16:51
Stepper will not change direction Topic started 21 Dec 2017 08:38, by Jorgie Last Post 22 Dec 2017 04:27 by InMyDarkestHour	Replies:2 Views:1420	Last Post by InMyDarkestHour 22 Dec 2017 04:27
step pulse and dir are not smooth Topic started 23 Nov 2017 08:41, by thang Last Post 26 Nov 2017 15:47 by andypugh	Replies:2 Views:1706	Last Post by andypugh 26 Nov 2017 15:47

Time to create page: 0.220 seconds