Basic Configuration 1389 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
TB6560AHQ locks steppers when power applied. Topic started 05 Apr 2015 01:40, by richard5008 Last Post 07 Apr 2015 22:56 by andypugh	Replies:9 Views:1764	Last Post by andypugh 07 Apr 2015 22:56
TB6560 Homing switches not triggering. Go Without? Topic started 30 Mar 2015 22:31, by JOguino Last Post 31 Mar 2015 07:53 by andypugh	Replies:2 Views:2036	Last Post by andypugh 31 Mar 2015 07:53
stepconf setup Topic started 28 Mar 2015 02:45, by johnl2 Last Post 30 Mar 2015 02:04 by johnl2 1 2	Replies:16 Views:3637	johnl2 Last Post by johnl2 30 Mar 2015 02:04
axis x homing and g54x0 from program Topic started 18 Mar 2015 14:01, by albova Last Post 18 Mar 2015 18:49 by albova	Replies:2 Views:1091	albova Last Post by albova 18 Mar 2015 18:49
Hard wired input to gcode Topic started 17 Mar 2015 13:57, by terans1085 Last Post 17 Mar 2015 16:03 by ArcEye	Replies:1 Views:1061	ArcEye Last Post by ArcEye 17 Mar 2015 16:03
Hardware button to reset spindle / feed override Topic started 14 Mar 2015 18:13, by pippin88 Last Post 15 Mar 2015 01:52 by newbynobi	Replies:1 Views:2424	Last Post by newbynobi 15 Mar 2015 01:52
only x y without z Topic started 13 Mar 2015 14:50, by albova Last Post 13 Mar 2015 22:14 by ArcEye	Replies:1 Views:1108	ArcEye Last Post by ArcEye 13 Mar 2015 22:14
Gmoccapy + gantrykins Topic started 23 Feb 2015 05:15, by Green# Last Post 23 Feb 2015 05:15 by Green#	Replies:0 Views:1399	Green# Last Post by Green# 23 Feb 2015 05:15
4th axis angular need help from newbie!!! Topic started 01 Feb 2015 04:39, by libas77 Last Post 22 Feb 2015 17:54 by libas77 1 2	Replies:12 Views:4223	libas77 Last Post by libas77 22 Feb 2015 17:54
Limits and Homing (KL6060 + G540 + LinuxCNC) Topic started 15 Feb 2015 22:45, by Oops Last Post 19 Feb 2015 15:37 by ArcEye	Replies:3 Views:1377	ArcEye Last Post by ArcEye 19 Feb 2015 15:37
Limit SW to activate pause, not e-stop Topic started 02 Feb 2015 01:09, by bottleworks Last Post 14 Feb 2015 04:34 by scubasteve1 1 2	Replies:12 Views:3087	scubasteve1 Last Post by scubasteve1 14 Feb 2015 04:34
Arduino for relay controls Topic started 12 Jan 2015 12:57, by justinj Last Post 13 Feb 2015 01:38 by TroyO	Replies:8 Views:4595	TroyO Last Post by TroyO 13 Feb 2015 01:38
x,y axis angle problem Topic started 03 Feb 2015 22:25, by alseusrah Last Post 03 Feb 2015 23:15 by andypugh	Replies:1 Views:1129	Last Post by andypugh 03 Feb 2015 23:15
Setting machine extents Topic started 22 Nov 2014 20:04, by Sven Last Post 23 Jan 2015 11:50 by joekline9	Replies:1 Views:1563	Last Post by joekline9 23 Jan 2015 11:50
Jog axis after limit switch reached Topic started 21 Jan 2015 21:27, by TopperH Last Post 21 Jan 2015 21:49 by ArcEye	Replies:1 Views:1350	ArcEye Last Post by ArcEye 21 Jan 2015 21:49
jogging non-axis stepgen Topic started 03 Jan 2015 02:13, by Badger Last Post 06 Jan 2015 08:17 by andypugh	Replies:3 Views:1437	Last Post by andypugh 06 Jan 2015 08:17
State of pin "TRUE' at startup??? Topic started 30 Dec 2014 01:55, by mmt Last Post 06 Jan 2015 01:28 by andypugh	Replies:2 Views:1198	Last Post by andypugh 06 Jan 2015 01:28
Coolant on in axis linked to parport 1 Topic started 30 Dec 2014 02:02, by mmt Last Post 30 Dec 2014 05:52 by cmorley	Replies:1 Views:1144	cmorley Last Post by cmorley 30 Dec 2014 05:52
LPT Spindel PWM Different Speed With M3 and M4 Topic started 26 Dec 2014 23:00, by juergen-home Last Post 27 Dec 2014 03:09 by juergen-home	Replies:2 Views:2076	juergen-home Last Post by juergen-home 27 Dec 2014 03:09
upgraded from 2.5 to 2.6 tuning issues Topic started 18 Dec 2014 10:31, by clkeck1 Last Post 20 Dec 2014 03:48 by clkeck1 1 2	Replies:13 Views:3312	clkeck1 Last Post by clkeck1 20 Dec 2014 03:48

Time to create page: 0.423 seconds