Basic Configuration 1390 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
If vismach model loads upside-down, are the coordinates wrong in the model? Topic started 05 May 2018 21:50, by Wireline Last Post 08 May 2018 10:16 by Wireline	Replies:2 Views:856	Last Post by Wireline 08 May 2018 10:16
Y axis suddenly moves twice as far Topic started 01 May 2018 19:39, by AlbertHall Last Post 04 May 2018 19:31 by AlbertHall	Replies:6 Views:928	Last Post by AlbertHall 04 May 2018 19:31
weird homing problem after stepper driver update Topic started 13 Mar 2018 23:00, by johnbump Last Post 03 May 2018 09:47 by andypugh	Replies:3 Views:875	Last Post by andypugh 03 May 2018 09:47
Home location different every day - Lathe Topic started 29 Apr 2018 01:48, by AppleAssassin Last Post 01 May 2018 23:37 by AppleAssassin	Replies:3 Views:1285	AppleAssassin Last Post by AppleAssassin 01 May 2018 23:37
7i92M, AXIS & no stepper movement Topic started 22 Apr 2018 15:16, by smplc Last Post 01 May 2018 22:40 by smplc 1 2	Replies:17 Views:4055	Last Post by smplc 01 May 2018 22:40
What represents, or what should I expect from, a well tuned servo system? Topic started 07 Apr 2018 19:05, by DeckelHead Last Post 01 May 2018 21:56 by DeckelHead 1 2 3 ... 6	Replies:56 Views:6269	DeckelHead Last Post by DeckelHead 01 May 2018 21:56
Combined home and limit does not work on Y axis Topic started 24 Apr 2018 20:43, by bally123 Last Post 25 Apr 2018 20:12 by bally123	Replies:3 Views:1767	Last Post by bally123 25 Apr 2018 20:12
Y and Z axes stopping well before limits Topic started 19 Apr 2018 18:21, by mattV54 Last Post 20 Apr 2018 06:58 by Clive S	Replies:6 Views:1242	Clive S Last Post by Clive S 20 Apr 2018 06:58
Problem with spindle start Topic started 07 Apr 2018 13:16, by Bordug Last Post 07 Apr 2018 13:55 by PCW	Replies:1 Views:1341	Last Post by PCW 07 Apr 2018 13:55
Only getting one direction of travel - old table new BOB, PC software Topic started 06 Apr 2018 14:43, by Gr8funTargets Last Post 07 Apr 2018 07:43 by Gr8funTargets	Replies:3 Views:773	Last Post by Gr8funTargets 07 Apr 2018 07:43
Ethercat EL7041 holding current Topic started 11 Mar 2018 10:47, by Hawkeye Last Post 01 Apr 2018 19:23 by Hawkeye	Replies:9 Views:1362	Hawkeye Last Post by Hawkeye 01 Apr 2018 19:23
Strange Z axis behaviour Topic started 21 Mar 2018 21:36, by aaron Last Post 31 Mar 2018 20:16 by DanMN	Replies:6 Views:994	Last Post by DanMN 31 Mar 2018 20:16
RDL2 - Arduino Command-Line Stepper Testing Utility Topic started 31 Mar 2018 04:11, by BrendaEM Last Post 31 Mar 2018 04:11 by BrendaEM	Replies:0 Views:1142	BrendaEM Last Post by BrendaEM 31 Mar 2018 04:11
Axis Creep Topic started 05 Mar 2018 00:06, by Nitram Last Post 30 Mar 2018 19:54 by andypugh 1 2	Replies:14 Views:2547	Last Post by andypugh 30 Mar 2018 19:54
Parallel port testing Topic started 28 Mar 2018 15:09, by jensor Last Post 29 Mar 2018 19:06 by jensor	Replies:2 Views:919	Last Post by jensor 29 Mar 2018 19:06
command to home Y axis Topic started 27 Mar 2018 01:40, by lorenzn Last Post 29 Mar 2018 02:08 by dgarrett	Replies:9 Views:2362	dgarrett Last Post by dgarrett 29 Mar 2018 02:08
INI entries in both AXIS_<letter> and JOINT_<num> sections Topic started 28 Mar 2018 03:31, by lorenzn Last Post 28 Mar 2018 03:49 by dgarrett	Replies:1 Views:1001	dgarrett Last Post by dgarrett 28 Mar 2018 03:49
DM542A / DB25-1205 Probable wiring issue Topic started 18 Mar 2018 03:00, by vfontaine Last Post 25 Mar 2018 15:30 by vfontaine	Replies:5 Views:5473	vfontaine Last Post by vfontaine 25 Mar 2018 15:30
Zelrp + Linuxcnc 2.7.12 + THC 150 Topic started 12 Feb 2018 09:37, by dyzio215 Last Post 21 Mar 2018 22:04 by tommylight 1 2 3	Replies:24 Views:3947	Last Post by tommylight 21 Mar 2018 22:04
Askpower VFD Connections Topic started 08 Mar 2018 15:53, by skrap58 Last Post 20 Mar 2018 23:13 by skrap58 1 2 3	Replies:25 Views:4501	Last Post by skrap58 20 Mar 2018 23:13

Time to create page: 0.195 seconds