General LinuxCNC Questions 6076 topics

Questions about LinuxCNC

Subject	Replies / Views	Last Post
Changing default of G64 to add parameters or set to G61 Topic started 12 Jan 2021 18:12, by jpvonoy Last Post 25 Mar 2022 07:33 by elf 1 2	Replies:12 Views:4041	elf Last Post by elf 25 Mar 2022 07:33
Commands in LinuxCNC to control specific pins of the DB25 connector..... Topic started 23 Mar 2022 19:02, by sd3534 Last Post 24 Mar 2022 22:15 by andypugh	Replies:5 Views:1337	Last Post by andypugh 24 Mar 2022 22:15
Axis off position Topic started 23 Mar 2022 13:07, by cndewitt Last Post 24 Mar 2022 21:17 by andypugh	Replies:4 Views:789	Last Post by andypugh 24 Mar 2022 21:17
linuxcncrsh for receiving stepper actvity feedback. Topic started 23 Mar 2022 10:13, by GGorge Last Post 24 Mar 2022 19:28 by andypugh	Replies:1 Views:697	Last Post by andypugh 24 Mar 2022 19:28
Probe tripped error I have no probe Topic started 24 Mar 2022 16:52, by kelsmitch117 Last Post 24 Mar 2022 19:11 by robertspark	Replies:5 Views:682	robertspark Last Post by robertspark 24 Mar 2022 19:11
Stepper Motor Machine with HOME_USE_INDEX proximity switch? Topic started 19 Mar 2022 15:49, by yeltrow Last Post 24 Mar 2022 07:16 by rodw	Replies:6 Views:1015	Last Post by rodw 24 Mar 2022 07:16
External Power On/Off + Estop Topic started 12 Mar 2022 01:14, by re_relentlessly Last Post 23 Mar 2022 00:03 by andypugh 1 2 3	Replies:20 Views:7162	Last Post by andypugh 23 Mar 2022 00:03
PING OT-CNC About Anilam Crusader Mill Topic started 17 Mar 2022 19:15, by Sierevello Last Post 21 Mar 2022 07:41 by tommylight	Replies:1 Views:680	Last Post by tommylight 21 Mar 2022 07:41
automatic Feedrate,stop spindle stalls,linuxcnc adaptive feed rate Topic started 03 Mar 2022 19:38, by orhan_izmir Last Post 21 Mar 2022 07:18 by tommylight	Replies:1 Views:1303	Last Post by tommylight 21 Mar 2022 07:18
5 axis kinematics Topic started 20 Mar 2022 08:08, by Ruddy Last Post 20 Mar 2022 15:00 by tommylight	Replies:1 Views:694	Last Post by tommylight 20 Mar 2022 15:00
[SOLVED] Run stepconf with non-standard parallel port/parport address Topic started 17 Mar 2022 23:02, by clunc Last Post 17 Mar 2022 23:02 by clunc	Replies:0 Views:697	Last Post by clunc 17 Mar 2022 23:02
Mesa 7i76E laser diode control (TTL) Topic started 29 Mar 2021 10:30, by robertspark Last Post 16 Mar 2022 23:12 by PCW	Replies:8 Views:1923	Last Post by PCW 16 Mar 2022 23:12
7I76 Pin Correlations Topic started 12 Mar 2022 20:41, by Ivan_The_Red Last Post 15 Mar 2022 20:04 by Ivan_The_Red 1 2	Replies:12 Views:2167	Ivan_The_Red Last Post by Ivan_The_Red 15 Mar 2022 20:04
Interrupted movement on X-Axis Topic started 26 Feb 2022 19:05, by Hammerbot Last Post 14 Mar 2022 12:39 by Hammerbot 1 2	Replies:13 Views:2347	Hammerbot Last Post by Hammerbot 14 Mar 2022 12:39
How to jog 4th joint in Axis Topic started 13 Mar 2022 22:26, by djupin Last Post 13 Mar 2022 23:37 by tommylight	Replies:3 Views:782	Last Post by tommylight 13 Mar 2022 23:37
New here and my first build Topic started 13 Mar 2022 00:25, by Giving-it-ago Last Post 13 Mar 2022 01:20 by tommylight	Replies:1 Views:975	Last Post by tommylight 13 Mar 2022 01:20
linuxcnc mint 2.8 to upgrade 2.9 Topic started 12 Mar 2022 05:58, by orhan_izmir Last Post 12 Mar 2022 13:52 by tommylight	Replies:2 Views:777	Last Post by tommylight 12 Mar 2022 13:52
Aligning machine with the stock Topic started 05 Mar 2022 19:17, by avarakin Last Post 10 Mar 2022 01:58 by avarakin	Replies:5 Views:889	avarakin Last Post by avarakin 10 Mar 2022 01:58
LINUXCNC CANopen Topic started 05 Mar 2022 12:23, by Jose01 Last Post 08 Mar 2022 08:14 by Jose01	Replies:2 Views:1962	Jose01 Last Post by Jose01 08 Mar 2022 08:14
python script - restart LinuxCNC with subprocess Topic started 07 Mar 2022 01:03, by nhanpham Last Post 07 Mar 2022 17:28 by BigJohnT	Replies:2 Views:986	Last Post by BigJohnT 07 Mar 2022 17:28

Time to create page: 1.789 seconds