Plasmac 577 topics

A place to ask questions about the Plasmac interface

Subject	Replies / Views	Last Post
QtPlasmaC Qtvcp Python Traceback on Run From Line after M67 Topic started 20 Dec 2022 01:59, by caretech Last Post 20 Dec 2022 16:06 by snowgoer540	Replies:9 Views:599	Last Post by snowgoer540 20 Dec 2022 16:06
qtplasmac lost arc = turn off and on again? Topic started 14 Dec 2022 13:18, by Mud Last Post 16 Dec 2022 13:34 by snowgoer540	Replies:7 Views:437	Last Post by snowgoer540 16 Dec 2022 13:34
error on closing QTPlasmaC Topic started 13 Dec 2022 21:32, by acourtjester Last Post 14 Dec 2022 03:28 by phillc54	Replies:4 Views:345	Last Post by phillc54 14 Dec 2022 03:28
Unexpected latency issue Topic started 21 Nov 2022 18:42, by LucasWorx Last Post 01 Dec 2022 23:49 by LucasWorx 1 2 3 4	Replies:30 Views:1823	LucasWorx Last Post by LucasWorx 01 Dec 2022 23:49
Upgrading QTPlasmaC version Topic started 01 Dec 2022 14:54, by acourtjester Last Post 01 Dec 2022 20:46 by acourtjester	Replies:2 Views:395	acourtjester Last Post by acourtjester 01 Dec 2022 20:46
convert SheetCam tools to QTPlasmaC material list Topic started 26 Nov 2022 03:56, by acourtjester Last Post 28 Nov 2022 17:46 by acourtjester 1 2	Replies:15 Views:999	acourtjester Last Post by acourtjester 28 Nov 2022 17:46
Material settings are dropped when file is executed Topic started 22 Nov 2022 12:06, by viesturs.lacis Last Post 22 Nov 2022 12:25 by snowgoer540	Replies:2 Views:244	Last Post by snowgoer540 22 Nov 2022 12:25
qtplasmac LASER + camera Topic started 11 Nov 2022 16:19, by Mud Last Post 12 Nov 2022 21:21 by Mud	Replies:7 Views:474	Mud Last Post by Mud 12 Nov 2022 21:21
Toggle program coordinate system to machine coordinate system Topic started 10 Nov 2022 06:10, by Daddio Last Post 10 Nov 2022 15:41 by snowgoer540	Replies:1 Views:291	Last Post by snowgoer540 10 Nov 2022 15:41
No arc ok Topic started 08 Nov 2022 15:05, by paulsao Last Post 08 Nov 2022 21:02 by rodw	Replies:1 Views:296	Last Post by rodw 08 Nov 2022 21:02
Can't use scribe in PlasmaC + Sheetcam. Topic started 31 Oct 2022 23:01, by santy Last Post 03 Nov 2022 22:23 by phillc54	Replies:5 Views:381	Last Post by phillc54 03 Nov 2022 22:23
Start in Fullscreen Mode Topic started 19 Apr 2021 16:52, by AgentWD40 Last Post 03 Nov 2022 10:14 by seuchato 1 2	Replies:19 Views:2654	seuchato Last Post by seuchato 03 Nov 2022 10:14
Raspberry Pi 4 with PlasmaC Topic started 27 May 2020 07:10, by phillc54 Last Post 29 Oct 2022 00:18 by rdtsc 1 2 3 ... 16	Replies:152 Views:16.1k	Last Post by rdtsc 29 Oct 2022 00:18
Upgrade to QTPlasmac from very old Plasmac version Topic started 22 Oct 2022 12:11, by Dee436 Last Post 28 Oct 2022 22:31 by phillc54 1 2	Replies:11 Views:1008	Last Post by phillc54 28 Oct 2022 22:31
Mac Mini 6,2 + LinuxCNC [2.8 vs. 2.9?] + QtPlasmaC Topic started 21 Oct 2022 15:30, by dlv Last Post 22 Oct 2022 23:53 by snowgoer540	Replies:4 Views:453	Last Post by snowgoer540 22 Oct 2022 23:53
Can you please release a version for cutting tubes? Topic started 21 Oct 2022 06:40, by taocitc Last Post 21 Oct 2022 22:00 by rodw	Replies:2 Views:369	Last Post by rodw 21 Oct 2022 22:00
Z axis command in PlasmaC Topic started 16 Oct 2022 15:55, by rajsekhar Last Post 17 Oct 2022 22:24 by phillc54	Replies:3 Views:400	Last Post by phillc54 17 Oct 2022 22:24
torch immediately raises after firing Topic started 12 Oct 2022 20:21, by rick@cortexracing.com Last Post 12 Oct 2022 21:20 by tommylight	Replies:1 Views:265	Last Post by tommylight 12 Oct 2022 21:20
Probe Test strange behavior Topic started 11 Oct 2022 09:48, by mariusl Last Post 12 Oct 2022 18:35 by mariusl	Replies:6 Views:458	Last Post by mariusl 12 Oct 2022 18:35
OxyFuel/Flame cutting machine controlling Topic started 11 Oct 2022 15:31, by rajsekhar Last Post 12 Oct 2022 03:11 by rajsekhar	Replies:2 Views:369	rajsekhar Last Post by rajsekhar 12 Oct 2022 03:11

Time to create page: 0.140 seconds