Plasmac 699 topics

A place to ask questions about the Plasmac interface

Subject	Replies / Views	Last Post
QtPlasmac Updates Topic started 19 Jan 2022 03:37, by phillc54 Locked Last Post 17 Mar 2025 00:48 by snowgoer540 Locked	Replies:2 Views:33.4k	Last Post by snowgoer540 17 Mar 2025 00:48
Plasmac Post Processors Topic started 23 Feb 2020 02:44, by phillc54 Last Post 11 Mar 2025 17:24 by Bjornstabo 1 2	Replies:17 Views:27k	Bjornstabo Last Post by Bjornstabo 11 Mar 2025 17:24
QtPlasmaC release. Topic started 15 Mar 2021 09:00, by phillc54 Last Post 22 Feb 2024 03:42 by phillc54 1 2 3 ... 22	Replies:211 Views:48.1k	Last Post by phillc54 22 Feb 2024 03:42
Photos Topic started 23 Apr 2020 01:46, by phillc54 Last Post 01 Jan 2023 02:54 by caretech 1 2 3 ... 15	Replies:146 Views:43.9k	Last Post by caretech 01 Jan 2023 02:54
Post Processor for LinuxCNC and PlasmaC Topic started 13 May 2019 07:13, by JTknives Last Post 25 Nov 2021 01:10 by tommylight 1 2 3 ... 13	Replies:122 Views:43.4k	Last Post by tommylight 25 Nov 2021 01:10
Simulator for QtPlasmaC Topic started 25 Aug 2021 05:04, by phillc54 Last Post 25 Aug 2021 05:04 by phillc54	Replies:0 Views:3039	Last Post by phillc54 25 Aug 2021 05:04
IMPORTANT NOTICE for PlasmaC users Topic started 12 May 2021 00:38, by phillc54 Last Post 25 Aug 2021 04:33 by phillc54	Replies:1 Views:7854	Last Post by phillc54 25 Aug 2021 04:33
Hypertherm Powermax65 Toolset Topic started 26 Jul 2020 17:42, by CBEAR Last Post 22 Feb 2021 02:45 by phillc54 1 2	Replies:12 Views:14.3k	Last Post by phillc54 22 Feb 2021 02:45
PlasmaC Documentation Topic started 25 Aug 2019 06:07, by phillc54 Locked Last Post 25 Aug 2019 06:07 by phillc54 Locked	Replies:0 Views:11.5k	Last Post by phillc54 25 Aug 2019 06:07

Config will not open after Buildbot2 upgade from 2.9.4 to 2.10 Topic started 22 Mar 2025 05:39, by rodw Last Post 25 Mar 2025 08:27 by snowgoer540 1 2 3	Replies:21 Views:608	Last Post by snowgoer540 25 Mar 2025 08:27
2.9.3 - Stuck in wrong state and stops Topic started 20 Mar 2025 06:09, by rodw Last Post 25 Mar 2025 02:57 by rodw 1 2	Replies:12 Views:422	Last Post by rodw 25 Mar 2025 02:57
Y Axis not working in Plasmac screen Topic started 24 Mar 2025 02:00, by ric812 Last Post 24 Mar 2025 15:02 by ric812	Replies:2 Views:108	ric812 Last Post by ric812 24 Mar 2025 15:02
QTplasmac Configs do not open after converting to master debs on buildbot2 Topic started 22 Mar 2025 05:27, by rodw Last Post 22 Mar 2025 11:54 by tommylight	Replies:2 Views:140	Last Post by tommylight 22 Mar 2025 11:54
QTPlasmaC post processor - SheetCam? Topic started 13 Mar 2025 02:10, by JTknives Last Post 22 Mar 2025 03:35 by rodw 1 2	Replies:14 Views:449	Last Post by rodw 22 Mar 2025 03:35
2.93 Torch crashes on material on long cuts. Topic started 20 Mar 2025 06:19, by rodw Last Post 20 Mar 2025 12:11 by rodw	Replies:2 Views:127	Last Post by rodw 20 Mar 2025 12:11
THCAD selection including ohmic sensing Topic started 14 Mar 2020 16:24, by calvin.d Last Post 20 Mar 2025 11:53 by tommylight 1 2 3 ... 5	Replies:49 Views:8733	Last Post by tommylight 20 Mar 2025 11:53
What’s causing this slag on -move on x axis Topic started 02 Mar 2025 06:18, by JTknives Last Post 07 Mar 2025 23:07 by JTknives	Replies:7 Views:314	Last Post by JTknives 07 Mar 2025 23:07
updating to QtPlasmac, copying setting from plasmaC? Topic started 07 Mar 2025 21:10, by JTknives Last Post 07 Mar 2025 22:03 by JTknives	Replies:1 Views:125	Last Post by JTknives 07 Mar 2025 22:03
Temporary materials was not loaded in a timely manner Topic started 06 Mar 2025 21:03, by JTknives Last Post 07 Mar 2025 09:10 by JTknives	Replies:7 Views:213	Last Post by JTknives 07 Mar 2025 09:10
Fusion 360 post processor file for Plamac Topic started 15 Jan 2020 01:27, by CFE Last Post 06 Mar 2025 14:37 by Hakan 1 2 3 ... 8	Replies:73 Views:13.3k	Hakan Last Post by Hakan 06 Mar 2025 14:37

Time to create page: 0.219 seconds