General LinuxCNC Questions 6110 topics

Questions about LinuxCNC

Subject	Replies / Views	Last Post
gedit Topic started 14 Aug 2019 21:02, by jensor Last Post 22 Aug 2019 16:53 by andypugh 1 2	Replies:15 Views:3516	Last Post by andypugh 22 Aug 2019 16:53
EMCO PC Mill 50 RS485 Data Capture Topic started 19 Aug 2019 16:55, by tsewell Last Post 22 Aug 2019 08:50 by rodw 1 2	Replies:12 Views:3542	Last Post by rodw 22 Aug 2019 08:50
Parallel port keeps changing address! Topic started 20 Aug 2019 17:12, by polobear189 Last Post 21 Aug 2019 15:17 by pl7i92	Replies:5 Views:1167	Last Post by pl7i92 21 Aug 2019 15:17
Tool table export/import Topic started 21 Aug 2019 05:02, by Kiddekanin Last Post 21 Aug 2019 15:13 by pl7i92	Replies:1 Views:1265	Last Post by pl7i92 21 Aug 2019 15:13
Overrides in plasma configs Topic started 19 Aug 2019 11:42, by phillc54 Last Post 19 Aug 2019 13:17 by tommylight	Replies:1 Views:763	Last Post by tommylight 19 Aug 2019 13:17
G38.3 gives error: "No characters found in reading real value" Topic started 17 Aug 2019 18:37, by zhivko Last Post 18 Aug 2019 10:40 by BigJohnT	Replies:4 Views:1755	Last Post by BigJohnT 18 Aug 2019 10:40
Looking for Linuxcnc savvy in Sothern California Topic started 15 Aug 2019 01:02, by gmills46 Last Post 16 Aug 2019 14:49 by andypugh	Replies:4 Views:1203	Last Post by andypugh 16 Aug 2019 14:49
LCNC-2.8 vs LCNC-2.9 Topic started 04 Aug 2019 11:12, by spma Last Post 16 Aug 2019 10:05 by spma	Replies:6 Views:3509	Last Post by spma 16 Aug 2019 10:05
Control of six-axis manipulator based on LinuxCNC and Ethercat Topic started 15 Aug 2019 08:50, by cheng Last Post 16 Aug 2019 00:51 by cheng	Replies:4 Views:1447	Last Post by cheng 16 Aug 2019 00:51
thc Topic started 15 Aug 2019 14:01, by getyers Last Post 15 Aug 2019 21:47 by rodw	Replies:5 Views:1696	Last Post by rodw 15 Aug 2019 21:47
Aluminum extrusion table base? Topic started 14 Aug 2019 23:00, by Leon82 Last Post 15 Aug 2019 17:52 by andypugh	Replies:3 Views:1087	Last Post by andypugh 15 Aug 2019 17:52
6 axis Gcode Topic started 15 Aug 2019 01:29, by cheng Last Post 15 Aug 2019 02:59 by cheng	Replies:1 Views:1202	Last Post by cheng 15 Aug 2019 02:59
Parallel Port failure? Topic started 13 Aug 2019 18:24, by jensor Last Post 14 Aug 2019 20:35 by jensor	Replies:7 Views:980	Last Post by jensor 14 Aug 2019 20:35
Simodrive 610 Analog drive torque or velo mode Topic started 14 Aug 2019 12:21, by JB-Motoring Last Post 14 Aug 2019 20:25 by andypugh	Replies:7 Views:1355	Last Post by andypugh 14 Aug 2019 20:25
linix cnc recrofiting Topic started 09 Aug 2019 20:39, by kavindu1 Last Post 14 Aug 2019 04:16 by PCW	Replies:8 Views:1093	Last Post by PCW 14 Aug 2019 04:16
Linear move on axis Y would exceed positive limit... Topic started 16 Jul 2019 05:36, by vmihalca Last Post 14 Aug 2019 01:39 by cheng	Replies:2 Views:1995	Last Post by cheng 14 Aug 2019 01:39
Gantry setup with two motors but home switches only on one joint Topic started 12 Aug 2019 12:17, by Louis Cypher Last Post 13 Aug 2019 22:24 by andypugh	Replies:8 Views:1479	Last Post by andypugh 13 Aug 2019 22:24
Plasmac configurator not working Topic started 15 Jul 2019 10:32, by phoenix Last Post 13 Aug 2019 21:52 by andypugh	Replies:9 Views:1430	Last Post by andypugh 13 Aug 2019 21:52
Need opinion on how, and if I can make a EDM machine with linux CNC :) Topic started 15 Aug 2018 19:38, by aliaj00 Last Post 13 Aug 2019 21:47 by andypugh 1 2 3 4	Replies:35 Views:8141	Last Post by andypugh 13 Aug 2019 21:47
and2 in multiple hal files? Topic started 17 Jul 2019 19:50, by vmihalca Last Post 13 Aug 2019 18:48 by vmihalca 1 2 3	Replies:22 Views:4753	vmihalca Last Post by vmihalca 13 Aug 2019 18:48

Time to create page: 1.929 seconds